The key reason for the blockage of the magnet is that the residue in the cassette of the steam sterilizer enters the magnet during the process of the exhaust pipe, and then the main movable plunger pump inside is stuck, resulting in that the magnet cannot be opened or closed, and then the steam Sterilizers cannot work abnormally. (Magnet manufacturer) The key reasons for such disadvantages are as follows:





1. The equipment that needs to be sterilized has residues in the process of cleaning, and the residues are left in the magnet during the process of sterilization and blocked in the magnet during the process of exhaust pipe. This kind of scenery is especially important in oral dentistry. (Magnet manufacturer)

2. Before sterilization, it is necessary to put an organic chemical instigation card into the cassette to carry out organic chemical testing of the steam sterilizer, and most of the organic chemical instigation cards placed in the hospital outpatient department are all in-package cards. This kind of instigation card Not moisture-proof, there will be migratory particles remaining inside the cartridge when wet. It is also possible to block the magnet if it is cleaned from time to time. (Magnet manufacturer)

3. The air at the furnace mouth of the steam generator is oxidized. When the steam is sprayed to the cassette, it is sprayed into the cassette together with the air oxidized powder. In the process of the exhaust pipe, when the air oxidized powder passes through the magnet, the plunger pump is stuck, so that the sterilization cycle cannot be completed by abnormal heating.